Product characteristics
1. Two component neutral fast curing, high elasticity, high modulus, and low permeability.
2. After solidification, the product forms a cold resistant, heat resistant, and corrosion-free elastomer, which is non polluting to the environment.
3. With most building materials, excellent bonding and sealing performance can be achieved without the need for primer.
4. The A component of this product is white, the B component is black, and the A/B components are mixed in a volume ratio of 10:1 (mass ratio of 12:1). After mixing, the color is black.
5. It has good compatibility with other silicone adhesives of Longli.
Main use: Suitable for secondary bonding and sealing of insulating glass.
Technical indicators
Sag mm standard (23 ± 2C ℃)
Surface drying time: min<1
Shore hardness: A ≤ 180
Applicable period: 35-50
Modulus: MPa>20min
Displacement capacity: 0.4~0.6
Constant elongation adhesion: ± 12.5% without damage
Limitations
1. Not suitable for drying all surfaces that have oozed grease, plasticizers, or solvents
2. Not suitable for structural assembly
3. Not suitable for long-term immersion or year-round damp areas.
4. Component B can react with water in the air and should not be exposed to the air for a long time.
