|
Two-component Sealant for angles |
已有 868 人浏览 |
 |
Product features: A wide range of bonding materials can be used for composite bonding of various building materials;Curing can be controlled; Fill in large gaps;The colloid has good Thixotropy, does not drip, and has good injection fluidity in the corner cavity;Has extremely high weather resistance; After solidification, it can be powder sprayed or painted. Product Introduction:Two component corner adhesive is widely used for high-strength corner bonding of aluminum alloy doors and windows, fiberglass doors and windows, or other metal doors and windows,It can effectively solve problems such as cracking, water seepage, and air leakage at the corners of corner codes connecting doors and windows.The product adopts a glue injection process, which has a high bonding strength after solidification, a flat colloid, and high self strength,It can effectively integrate the corners of doors and windows, effectively avoiding problems caused by deformation of the corners. Technical data composition: Two component polyurethane
Viscosity: low viscosity paste
Initial curing time: 23 ℃, humidity 50%, approximately one hour
Effective strength curing time: 23 ℃, humidity 50%, about four hours, after about 48 hours, the maximum strength can be reached
Color: White+Beige
Storage period: 12 months in a dry environment at room temperature
Packaging: 2 × 310ml/set, 10 sets/box
Application scope:Aluminum alloy door and window corner splicing, aluminum wood door and window corner splicing, glue injection group corner piece waterproof filling, structural bonding between unpainted aluminum materials, joint bonding between hard plates, and bonding between different materials,For example, fiberglass, aluminum alloy, compression plates, wood, etc. can fill gaps up to 9mm and can be used for repairing damaged adhesive properties. |
电话：400-1535-116 |
邮箱：longli666@163.com |
 |
|
|
